|
Carbide
Extrusion Tooling - Semi-Finished Header Inserts
Carbide Tipped Injector Nozzles - Miscellaneous Carbide Tooling
Carbide Draw Dies - Carbide Draw Mandrels
 |
Carbide
Extrusion Tooling
Carbide extrusion tooling, long recognized as a must for greater
tool life and extended production runs, is available in solid
type or inserted in H-13 heat-treated steel cases. Your company
designs would dictate what style would benefit your application.
On the average, carbide tooling outlasts hardened steel 10 to
1. This type of carbide tooling can greatly enhance your production
of aluminum cable and/or conduit. |
Back
to Top
 |
Semi-Finished
Header Inserts
Semi-finished header inserts are designed to save your tool
room on labor thus saving valuable time and money in the making
of carbide header tooling. All inserts are ground to your specs
or ours and the bores are honed or lapped straight and true
to within .001 T.I.R.
Your tooling people start with quality thus the savings of time
over using rough cored carbide...
|
Back
to Top
 |
Carbide
Tipped Injector Nozzles
Carbide tipped injector nozzles and spray nozzles easily outlast
steel versions by over 10 to 1. Carbide does not wear or receive
marks from associated seats used and usually is not affected
by the material being sprayed or injected. As the picture illustrates,
styles and designs are widely varied to suit the individual
application.
|
Back
to Top
 |
Miscellaneous
Carbide Tooling
From slitter knives to extrusion punches and cutter blocks for
gallon can manufacuring...Contempory Carbide can fabricate tooling
to your specs...many applications are open to carbide tooling
for longer wear and savings achieved from less down time.
|
Back
to Top
 |
Carbide Draw Dies |
Back
to Top
 |
Carbide Draw Mandrels |
Back
to Top
|
